belavi 23701-23 Manual Del Usuario página 8

Assembly Instructions
*Do not tighten bolts down completely during this portion of assembly.
J
B
D
H
B
B
STEP 2:
Insert one M6x30 Bolt (H) with Washer (J) through eyelet on inner wall
of Lower Tray (D), and into upper bolt-threading found near the bottom
end of Pole (B). Insert one M6x30 Bolt (H) with Washer (J) through
eyelet of inner wall, underneath Lower Tray (D), and into lower bolt-
threading found near the bottom end of Pole (B). Follow these steps to
connect remaining part B's near the corners of part D.
8