kooa GEAR 3S Manual De Instrucciones página 26

Cleaning
Trimmer blade
General
− Use a slightly damp soft cloth to wipe the trimmer and comb attachments if neces-
sary.
Lubricating the trimmer blade
Changing the trimmer blade
The trimmer blade is a wearing part.
Replace the trimmer blade should the trimming performance degrade after prolonged
use despite regular cleaning and lubrication.
Please note that the trimmer blade can be ordered as a spare part from customer service.
1. Remove the old trimmer blade, as described under "Cleaning".
2. Use the included cleaning brush to clean the interior behind the trimmer blade.
3. Put on the new trimmer blade. Ensure it clicks into place correctly.
26
1. Remove the comb attachment if necessary.
2. Push off the trimmer blade.
3. Use the included cleaning brush to clean the
interior behind the trimmer blade.
4. Remove hair from the trimmer blade using
the cleaning brush.
5. Slightly move the trimming height
adjustment back and forth in the spot
shown with a large arrow to ensure smooth
movement.
1. Remove the comb attachment.
2. Remove hair using the cleaning brush.
3. Apply a drop of oil to each of the spots shown.
4. Then switch on the trimmer briefly for the oil to spread
evenly, forming an oil film.