Klafs 21029 Instrucciones De Montaje página 35

9.1. Activating the WLAN module
6
90 °C
Sauna
Sanarium
Infrared
60 °C
40 °C
7
Bathing mode
Programs by type of
bathing
Programs by
effect
Clues Settings Light
5. Switch the controller off and then
on again at the main switch (6).
6. The WLAN module in the
controller will be activated after
you have switched the controller
on.
D
The activation process takes
approximately 30 seconds and is
indicated by the WLAN symbol (7)
flashing.
7. Once the activation process is
complete, the WLAN symbol (7)
stops flashing and remains lit.
The WLAN module is then ready
to use.
Page 35 / 104