Bromic Heating 3400W Manual De Instrucciones página 5

CEILING RECESS INSTALLATION INSTRUCTIONS CONTINUED ...
6. Carefully remove the 4x
of the heater and align the heater trim assembly with the
mounting holes.
The cable is fed through the opening in the centre of the
trim assembly.
NOTE: REAR HEATER BRACKET IS
NOT TO BE REMOVED.
7. Re-install the 4x M5x10mm screws to attach the
heater to the trim assembly.
8. Feed the heater cable through the IP cover and cable
gland . Attach the IP bracket to the heater using
M6x10mm screw.
the
When in location, ensure the
fastened using a 20mm (13/16") spanner.
M5x10mm screws at the rear
M16 cable gland is
bromic.com
20mm
(13/16")
5