Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
• Check your stroller for loose screws, worn parts, torn material or stitching on a regular
basis. Replace or repair parts as needed.
• Discontinue use of stroller should it malfunction or become damaged. Please contact our
customer service Parts Hotline to arrange for repair or obtain replacement parts.
• Door way needs to be 36" or more to fit through when open.
IMPORTANT!
stroller, please follow these instructions carefully. Please
keep these instructions for future reference.
IMPORTANT!
inspect this product for damaged hardware, loose joints,
missing parts or sharp edges. NEVER use if any parts are
missing or broken.
IMPORTANT!
5
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
To ensure safe operation of your
Before assembly and each use,
Adult assembly is required.
ASSEMBLY
Remove stroller from box. The front wheel
and rear wheels
MUST
be installed prior
to use.
FENDER
If assembly is necessary
(Fig. 1a), see Fender page 15.
FRONT WHEEL
To attach the front wheel, unfold stroller as
described in the section following:
1)
• Unlock the release lever (Fig. 1a) and
unfold stroller frame by pulling upward
on the stroller handle until the frame
locks (Fig. 1b).
2)
• Slide the front wheel onto the front fork
(Fig. 2).
3)
• Slide the retainer plate onto the front
wheel. Be sure that the raised lip is
pointing toward the fork and insert it
into the slot on the fork. The tab on the
retainer plate must be lined up with the
slot before tightening the wheel (Fig. 3).
4)
• With the wheel in position, tighten the
axel nuts and tighten with standard
crescent, box, or open end wrench.
You should feel significant resistance
and the wheel should be held tightly in
place (Fig. 4).
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 1a
Fig. 1b
Fig. 2
Front Fork
Slot
Axel and Hub
Retainer Plate
Axel Nut
Fig. 3
6
Publicidad
