Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
REAR WHEELS
5)
• Rest the stroller upside down, on the
handle.
• Press the rear wheel posts into the rear
frame hub until it clicks into place
(Fig. 5a).
NOTE: Pull on the rear wheel to ensure
that it is securely attached to the stroller.
• To remove the rear wheels, press the
wheel release button (Fig. 5b) on the rear
tube and pull the wheel from the hub.
TIRES
6)
• Tires are shipped un-inflated. The tires
should be inflated on a regular basis to
the P.S.I. specified on each tire. Always
use a bicycle style hand air pump to
inflate the tires. *Not included (Fig. 6).
7
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
PARENT TRAY
WARNING:
not place hot liquids or
more than 3 pounds in
the parent tray. Serious
Fig. 4
burns or unstable
conditions could result.
7)
• To attach parent tray: Snap the
upper portion of the tray over the
handle (Fig 7a).
• Attach the lower portion of the parent
tray to the cross tube, with the screws
provided (Fig. 7b).
NOTE: Check to make sure the
parent tray is secure before using.
Fig. 5a
CANOPY
8)
• To open the canopy: push forward
on the front edge of the canopy.
Push downward on the tensioners
to secure (Fig. 8a).
• To fold the canopy: pull upwards
on the tensioners and then pull
backwards on the front edge (Fig.
8b).
Fig. 5b
Fig. 6
ASSEMBLY
Do
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 7a
Fig. 7b
Fig. 8a
Fig. 8b
8
Publicidad
