Publicidad
Idiomas disponibles
Idiomas disponibles
USER GUIDE
Setting up the product
The product can be placed on a table or similar level
surface for use.
In addition, the product can also be placed directly
on the ground and securely fastened in the earth with
the ground spike (2) included in the scope of de-
livery.
Proceed as follows:
1. Take the product in your hand and look for the bracket for the ground spike (4) at the bottom of the RGB
LED outdoor solar lighting globe (1).
2. Take the ground spike (2) and insert it firmly into the bracket (4) provided on the product
3. Now turn the product so that the bottom side is facing downwards and insert the RGB LED outdoor solar
lighting globe (1) with the ground spike (2) firmly into the soil or a similar surface
The product is now securely fixed in the ground.
Switching the product on/off
The product has an integrated brightness sensor that automatically switches the light of the RGB LED outdoor
solar lighting globe (1) on when it is sufficiently dark or automatically off when there is too much ambient light.
To activate this, proceed as follows:
1. Hold the product in your hands.
2. To activate the product, press and hold the on/off switch (3) for approx. 2 seconds. The product and the
brightness sensor are now ready. When it is sufficiently dark, the light switches on automatically.
3. If you press and hold the on/off switch (3) again for approx. 2 seconds, the product will turn into sleep
mode. The light will then only be switched on again when the brightness sensor detects sufficient darkness.
To switch off the product completely, press and hold the on/off switch (3) for about 4 seconds. If the light
glows red while pressing the button, the product is deactivated. Then release the on/off switch (3) again and
the light doesn't glow anymore. The brightness sensor is now deactivated, and the light of the product cannot
be switched on.
Setting the luminous colour
You can select the illumination of the product from a total of 7 different RGB light colours, warm white light col-
our, automatic colour changes as well as an automatic, continuous colour change. To do this, press the on/off
switch (3) once or several times when the product is switched on. The light colour and light mode then change
in this sequence:
Continuous colour change – warm white – red – green – blue – yellow – purple – cyan – pink – colour change.
TECHNICAL DATA
Item number
Model number
Power supply
Type of battery
Battery capacity
Solar panel
LEDs
LED power
Luminous flux
Colour temperature
660135 / 660142 / 660159
OKL200 / OKL250 / OKL300
6 V DC, 166 mA
Lithium-ion-battery
1200 mAh
1.0 W
2x RGBW LED
0.40 W (max.)
10 Lm
3000 K
For garden
Lifetime
Charging time
Lighting time
Protection
Protection class
Ambient temperature
Product material
Colour
Dimensions (WxHxD)
Weight
10
For table
approx. 50000 h
approx. 8 h (in clear weather)
up to 12 h
IP44
III
-13° C ~ +35° C
PE
Marble
200 x 180 x 200 mm (660135)
250 x 230 x 250 mm (660142)
300 x 280 x 300 mm (660159)
385 g (660135)
475 g (660142)
655 g (660159)
Publicidad
