Publicidad
Idiomas disponibles
Idiomas disponibles
g)
Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away
from moving parts. Loose clothing, jewelry, or long hair can be caught in
moving parts.
h)
Before switching the unit on, remove any regulating tools or keys. Any tools or
keys left in the rotating part of the unit may cause injury.
i)
The product is not a toy. Children should be watched to ensure that they do
not play with the appliance.
j)
Do not touch the immobilized blade immediately after use - it may be hot, risk
of burns.
2.4.
Safe use of the device
a)
Do not overload the device. Use tools that are suitable for the application. A
correctly selected product will do a better and safer job for which it was
designed.
b)
Do not use the device if the ON/OFF switch does not function properly (does
not turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
c)
Unplug the unit before making adjustments, changing accessories, or putting
it away. This precaution reduces the risk of accidental start-up.
d)
Disconnect the device from the power supply before adjusting, cleaning, or
servicing. This precaution reduces the risk of accidental start-up.
e)
Keep unused product out of the reach of children and anyone unfamiliar with
the device or this manual. Products are dangerous when used by
inexperienced users.
f)
Keep the unit in good condition and the blade needs to be kept sharp. Check
before each use for general damage or damage to moving parts (cracks in parts
and components or any other condition that may affect the safe operation of
the device). If damaged, return the device for repair before use.
g)
Keep the product out of the reach of children.
h)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
i)
When transporting or moving the device from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the device is used.
j)
Avoid situations in which the device stops under heavy loads during operation.
This can cause overheating of the drive elements and consequent damage to
the equipment.
k)
Do not touch any moving parts or accessories unless the device is unplugged.
l)
Do not move, shift, or rotate the device while in operation.
m) Do not leave the device switched on unattended.
n)
Clean the device regularly to prevent permanent dirt build-up.
Publicidad
