PNI Robo Dog Manual De Usuario página 6

package
B. Make sure the battery is connected correctly.
C. Insert the USB cable into the USB Type C port on the robot and into a
230V-5V adapter. Insert the adapter into the socket. The LEDs around the
USB port turn red. When the battery is charged, the LEDs turn off.
Warnings
1. The robot uses a 3.7V 350mAh Li-Ion battery. The battery charging time
is up to 60 minutes. The operating time (battery 100%) is up to 30 minutes.
2. Do not use non-rechargeable batteries.
3. Charge the battery correctly and connect it observing the polarity.
4. Disconnect the battery if you do not use the robot for a long time.
5. This toy is not recommended for children under the age of 36 months.
6. Do not wet the robot, clean it only with a dry cloth.
7. Do not throw away the user manual, keep it for future reference.
8. This is a voice recognition device. If it is used in a noisy environment, the
robot may not recognize voice commands.
9. For correct operation, avoid touching both touch-sensitive surfaces at the
same time.
10. Do not give the robot several voice commands at the same time. Leave the
processing and execution pause between commands.
11. When the battery is discharged, the robot will move more slowly, and voice
commands or touch-sensitive surfaces may not work. Recharge the battery.
Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that the interactive intelligent robot PNI
Robo Dog is in compliance with Directive 2009/48/EC. The full text of the
EU declaration of conformity is available at the following internet address:
https://www.mypni.eu/products/9033/download/certifications
User manual - 6