Descargar Imprimir esta página

Homelite HOMHT01 Manual Del Operador página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS
Motor .................................................................. 12 Volt DC
Cutting Capacity Shrubber Blade ........................... 5/16 in.
KNOW YOUR GRASS SHEAR/SHRUBBER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
BLADES
The grass shear/shrubber comes with two blades. The 8 in.
shrubber blade can be used on shrubs and the 4 in. grass
shear blade should only be used on grass and light weeds.
LOCK-OUT BUTTON
Your tool is equipped with a lock-out button which reduces
the possibility of accidental starting. The lock-out button
is located on the handle above the switch trigger. You can
depress the lock-out button from either the left or right side.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
FEATURES
FEATURES
Blade Length ................4 in. (grass shear) / 8 in. (shrubber)
No Load Speed .........................................1,200/min (RPM)
SCABBARD AND SHEATH
The scabbard and sheath keep the operator from coming
in contact with the sharp blades when the tool is not in use.
They also help keep the blades from being nicked or dam-
aged when the tool is in storage.
TOOLLESS BLADE CHANGE SYSTEM
Your grass shear/shrubber has a toolless blade change sys-
tem that does not require the use of a tool (blade wrench)
when installing or removing the blades.
ASSEMBLY
PACKING LIST
Grass Shear/Shrubber
Sheath
Scabbard
Grass Shear Blade
Shrubber Blade
Charger
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of the product
with damaged or missing parts could result in possible
serious personal injury.
Page 6 — English

Publicidad

loading