Publicidad
Idiomas disponibles
Idiomas disponibles
2. Touch the Boost button; the heating zone will begin to work at Boost
mode.
The power display will show "P" to indicate that the zone is boosting.
3. The Boost power will last for 5 minutes and then the zone will go
back to the power stage that was set before boost.
4. If you want to cancel the Boost during these 5 minutes, touch the
heating zone selection button; an indicator next to the key will flash.
And then touch the Boost button. The heating zone will go back to
the set temperature stage.
Restrictions when using
Every zone in this hob can work with the Boost function. If you need to
use the boost, please switch off the other zone in the same group first.
Otherwise the
zone and power level
20
Becken_Placa de Indução_BIH3302_Manual_v3.indd 20
and
symbols will flash on the display of the selected
is automatically set.
06/04/2018 10:13
Publicidad
