Mediclinics Saniflow CP0016H -ASTM Instrucciones De Instalación Y De Seguridad página 2

BEFORE YOU BEGIN
VERY IMPORTANT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. READ AND KEEP IN
MIND ALL INSTRUCTIONS AND RECOMMENDATIONS DESCRIBED THROUGHOUT THIS MANUAL.
SAFETY INSTRUCTIONS
- Only a qualified technician can install, adjust and maintain this baby changing station. Any operations
performed on the changing station must be compliant with the safety laws and regulations that are in
force at the time. Saniflow Hand Dryer Corporation. is not liable for damages caused by the improper
installation, poor maintenance or misuse of this baby changing station.
- It is very important that, once installed and put into operation, the baby changing station is periodically
inspected in order to ensure that it remains firmly secured to the wall and it has not suffered any
damage that may cause any harm to users. It is very important to make sure that the baby changing
station opens and closes properly.
- Any additional component or spare part required for the baby changing station should only be
purchased from the manufacturer or from an authorized distributor.
- Under no circumstances may the baby changing station be used if there are indications that any part of
it is broken, torn or lost.
- The baby changing station must be secured to a wall capable of withstanding the loads to which it will
be subjected daily without a problem and the most appropriate wall fixings must be used for each type
of wall.
- The total maximum recommended weight for this changing station (including the baby and the parcel
bags) is 65 lbs (30 kg approx.). Excessive weight may create dangerous or unstable situations for the
baby.
- All assembly joints and wall fixings must always be properly tightened and inspected regularly to make
sure that they are properly fastened.
- It is very important to install the changing station away from sources of heat or open fire in order to
avoid the risk of fire.
- If the changing station is vandalized, it is very important to remove it from the wall and perform a
thorough inspection of the unit and the wall where it should be installed in order to detect and solve any
problem that may lead to an accident.
- For better comfort and safety, sanitary liners should always be available in the changing station and the
unit should be thoroughly cleaned daily in order to minimize the spread of infectious diseases.
- Under no circumstance should the baby be left unattended at any time on top of the baby changing
station.
- The baby changing station is designed to be used without any pillow. Please do not use pillow or any
other device that could affect the baby placement on the changing station.
- Parcels or accessory items, or both, placed on the unit may cause the unit to become unstable.
- In order to avoid injury from falling or slipping, it is very important to always use the changing station's
restraint systems (safety belt).
- Restraint system: Always place the baby in the centre of the changing station, embracing its waist
with the safety belt and ensuring that the belt buckle has clicked once closed. Tighten or loosen the
straps as necessary to obtain a perfect grip of the baby on the changing station. The safety belt should
not be too tight around the baby because it may hinder its breathing or cause injury by compression,
nor should it be too loose because the baby may slip and fall to the ground.
ENGLISH