Publicidad
Idiomas disponibles
Idiomas disponibles
BASIC OPERATION and TWS
POWER SOURCE
1. Please charge the unit at least 4 hours before first time use.
2. Turn the dial clockwise/counter-clockwise to switch on/off the unit.
CHARGE THE BATTERY
When the battery is charging, the battery icon will show on the display screen. After the battery has
fully charged, the light will turn OFF.
1. Connect the USB cable to the DC5V interface of the speaker firmly. Supply the unit with 5V, 1A
minimum.
2. When the battery is fully charged, please disconnect the USB charge cable
from the speaker.
3. When the speaker is completely out of battery power, you may plug it to a
USB 5V, 1A charger. If the charger is 5V/1A, the speaker can work at about
50% volume. If the charger is 5V/2A, the speaker can play at about 75%
of volume while charging. If the charger is 5V/3A the speaker can play at
about 90% volume while charging.
During the charging process, the battery will gradually charge so the speaker
can play at 100% volume after a complete charge. For faster charge a 5V, 3A supply is
recommended
SPECIFICATIONS
Power Output:
Frequency Response:
Power Supply:
POWER/VOLUME
Turn clockwise to turn ON the unit and increase the volume. Turn counter-clockwise to turn OFF
the unit and decrease the volume.
PREVIOUS/NEXT BUTTON
Under playing status, press PREVIOUS/NEXT button to get back to a previous
or next song. In FM Mode use these button to change FM stations.
PAUSE/PLAY BUTTON
To stop playing the current track, please press PAUSE/PLAY button on the
control panel. Press it once again to continue playing.
MODE/LED ON
Press to toggle through the different Modes: BT/FM/AUX/USB. This button also works as the
ON/OFF button for the LED Lights. Press and hold to activate and deactivate the LED Lights of the
unit.
AUX.IN
1. Connect an audio 3.5mm TRS cable to the AUX input of the speaker and the other end to an
external audio devices such as MP3 player, discman, record player, etc. Select LINE by pressing
the MODE/LED ON button for audio playback.
MIC.IN
Plug-in a 6.35mm (TS/TRS) microphone cable directly for to the input. This connection is for
microphone only.
USB JACK
Insert a USB flashdrive in the port for music playback. The unit will only reproduce .mp3 music files
8W
50Hz-20KHz
DC5V
Publicidad
