Listo VT23 L3 Instrucciones De Uso página 9

Speed adjustment
1.
Plug the power cord into a suitable wall socket.
2.
Adjust the speed using the buttons:
0: stop
1: low speed
2: high speed
3. You can adjust the angle manually by lowering or raising the guards.
4. You can activate or deactivate the oscillation by pressing or pulling the button behind the
guard on the motor block.
V.1.0
USE
Setting the oscillation
Adjusting the tilt angle
16
CLEANING AND MAINTENANCE
CAUTION !: The appliance must be unplugged from
the power point before cleaning or dismantling the
guards.
•
You can remove the front guard to access the blades to clean them. Refer to the "Assembly"
section.
•
Remove dust with a soft, dry cloth.
•
For a more thorough cleaning, you can clean the blades and body of the appliance with a
soft damp sponge and a mild detergent (such as washing-up liquid). Rinse with clean water
and dry using a soft cloth.
•
Make sure that water cannot come into contact with the motor.
•
Do not plug the unit back in until it is dry.
17 V.1.0