TRW easycheck Guia página 11

FastCheck applications
The 'FastCheck' applications allow the
service tool to communicate with other
system control modules on the vehicle.
Connection
Connection to the specific system is via
either the vehicle's EOBD (J1962)
diagnostic socket or by a system
specific connector. Refer to the 'Vehicle
Application List' on the enclosed CD
ROM to determine the correct cable.
Connect the cable to the service tool
and secure the fixing screws.
F G
E
H
D
I
C
J
B
K
A
L
If using the EOBD (J1962) pin-
switchable cable (YTD951), ensure the
settings on the switch box correspond
to the settings listed for the vehicle and
system being tested.
WARNING: Incorrect settings on the
switch box may cause irreparable
damage to the vehicle's electrical
system.
Connect to the vehicle diagnostic
connector. Once connected, the current
software version number is displayed
before displaying the main menu.
6 7
5 8
4
9
3
10
2 11
1
12
Getting started guide
MAIN MENU
1. EOBD
2. FastCheck ABS
3. FastCheck Airbag
4. FastCheck Climate
5. FastCheck EPB
6. FastCheck Service
7. User Menu
Use the and keys to select the
required application and press
confirm the selection.
Turn the vehicle ignition on.
Select the vehicle manufacturer and
then press the key. Follow the on
screen instructions to run the
application.
FastCheck compatibility
To determine if a vehicle is supported by
a particular FastCheck application, refer
to the Vehicle Application List on the
CD-ROM. The Vehicle Application List
also specifies which cable should be
used for connection to the vehicle and,
if required, the settings that should be
used for the EOBD (J1962) pin-
switchable cable (YTD951).
to
7