Allen + Roth MMV1032MV Manual De Instrucciones página 4

INSTALLATION INSTRUCTIONS
2. Hold the bottom of the "J" Bracket (B) on the marked line.
Mark the locations on the wall through the 2 mounting
holes in the "J" Bracket (B).
3. Drill the 2 marked points. Insert wall anchors
(not included) if the screws will not be going directly
into studs.
Attach the "J" Bracket (B) to the wall, using appropriate
mounting screws (not included) .
4. Carefully, hold the cabinet (A) in desired position on
"J" Bracket (B).
Mark the locations on the wall through the 4 mounting
holes in back of cabinet (A).
Remove the cabinet (A) from the "J" Bracket (B).
Drill the 4 marked spots on the wall. If screws will not
be going directly into studs, insert wall anchors
(not included).
Attach the cabinet (A) to the wall, using appropriate
mounting screws (not included) .
IS1136
2
3
4
4
B
B
A
B