BYK haze-gard i Family Instrucciones Resumidas página 8

haze-gard i Family
4 Quick Measurements
Perform quick measures on samples. Measurements can be triggered via the foot switch,
the button Measure or the symbol Measure on the touch screen. Results can be saved op-
tionally in projects.
1. In the main menu select Measure.
2. Select test method on top; corresponding scales are displayed.
3. Place sample at appropriate port; depending on scales given in standard:
4. Press the Measure button.
5. Continue with next measurement or proceed to Next Sample.
6. To store results select Save; systems jumps over to a
7. To end quick measurement mode, select the Home icon.
In top row the average value is shown, single readings below.
NOTICE
In case of statistics evaluation the average value will be saved. Number of measurements
per sample depends on statistics settings in
[} 12]".
8
– Left port: Measure Clarity (C).
– Right port: Measure Haze (H) and Total Transmission (T).
BYK-Gardner GmbH
"Project [} 10]".
"Standards [} 9]" and in "Configuration
293 026 162 - 2210