Publicidad
K E Y B O A R D W A K E U P / S L E E P
• If your keyboard is sleeping press any key to wake it up, it will remember the last device connected.
• Wireless 2.4GHz
When you turn your keyboard on a green light will show to tell you wireless has properly connected.
If the keyboard shows no signs of working in your device try pairing it again by repeating the steps indicated in the Wireless
2.4GHz Pairing Instructions.
• Bluetooth
When you turn your keyboard on a blue light will show to tell you bluetooth has properly connected to the last device (1 2 or 3).
If the keyboard shows no signs of working in your device try pairing it again by repeating the steps indicated in the Bluetooth
Pairing Instructions.
R E P L A C I N G K E Y C A P S A N D S W I T C H E S
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Included
Mechanical
Tools
Switch
Example of a switch
as seen from top
after you remove the
keycap to prepare for
switch removal.
Switch Puller
Keycap Puller
Remove Switches
1.
Grab your Switch Removal Tool and align the gripping teeth vertically (on the
Y-Axis) at the center of the switch, as shown in the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until the switch
releases itself from the plate.
3. Using firm but gentle force pull the switch away from the keyboard using a
vertical motion.
Note: If the key doesn't work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing
keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid
damage to the keyboard due to operating errors.
North-facing Logo
Switch Shaft
The Switch Puller tool aligns Vertically to the Switch to
unclip the plastic securing the switch to the plate.
Install Switches
1.
Check that all the switch metallic pins are perfectly straight and clean.
2. Align the switch vertically to have the Gateron logo facing north. The pins should align
themselves to the keyboard PBC.
3. Press the switch down until you hear a click. This means your switch clips have attached
themselves to the keyboard plate.
4. Inspect the switch to ensure it's properly attached to your keyboard, and test it.
T EC H N I C A L ASS I STA N C E
For technical assistance, please email to
support@epomaker.com with your purchase
order number and a detailed description of
your issue.
We normally respond to enquiries within 24 hours.
CO M M U N I T Y FO RU M S
Join our community and learn together with
other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/user/epomaker/
WA R R A N T Y
EPOMAKER's Warranty covers any factory defects that might
affect the proper functionality of your purchase. It doesn't
cover any damage that may occur from normal wear and tear.
If your product is defective we will send you a replacement
unit. Replacement units might require you to send the
defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought
from our website (EPOMAKER.com). Your item will not be
covered by your 1 year warranty if the inspection shows any
sign of modification or changes unsupported by the original
product, these include: Changing internal components,
Assembling and reassembling the product, Replacing
Batteries, etc.
We will ONLY cover the item if it is bought from our official
stores. You do not have a warranty with us if you bought the
item from another reseller or likewise. Please contact the store
that you bought your product from to resolve issues.
EN
Publicidad
