Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
CLEANING THE HOLE AUGER
Remove the battery packs.
Remove the auger bit from the drive shaft by unlocking
the quick release pin.
Store the locking pin in the auger when not in use.
Clean dirt and debris from the auger bit, using a damp
cloth with a mild detergent.
WARNING:
Remove the auger bit from the digging tool before
cleaning with water. Do not wet the motor housing.
NOTE: Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as kerosene.
Moisture can cause a shock hazard. Wipe off any moisture
with a soft dry cloth.
Use a small brush or the air discharge of a small vacuum
cleaner brush to clear dust or debris from the air vents
on the motor housing.
This product has a 90-day satisfaction guarantee policy, as well as a three-year
limited warranty. For warranty and policy details, please go to www.RIDGID.com
TRANSPORTING AND STORING
Remove the battery packs.
Stop the product, and allow it to cool down before storing
Remove the auger bit from the drive shaft by unlocking
For transportation, secure the product against movement
Clean the hole auger thoroughly before storing.
Store the hole auger in a dry, well-ventilated place that
or call (toll free) 1-866-539-1710.
11 — English
or transporting.
the locking pin.
NOTE: Store the locking pin in the auger when not in use.
or falling to prevent injury to persons or damage to the
product.
is inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts. Do
not store outdoors.
Publicidad
