Kohler K-527 Manual Del Propietário página 8

All manuals and user guides at all-guides.com
Boot
Check Valve
Split Boot
Copper Tube
Nut
Screen
O-Ring
Seal
Clean the Inlet Screens
Disconnect the power and turn off the water supply.
Unthread the plastic nuts from the hot and cold inlets.
Remove the copper tubes. The O-ring and screen may be attached to the end of the tube.
If the screen remains in the check valve, use a small flat-blade screwdriver to gently pull the check
valve from the valve inlets.
Remove the screens from the copper tubes or check valves.
Clean the screens to remove any dirt or debris.
Rinse or replace the check valves and screens.
Reassemble the inlet connections.
1143086-5-E 8 Kohler Co.