Eureka ATOM BARISTA Instrucciones De Manejo página 35

EN
5.3.3 DOSE SELECTION MODE
This screen allows setting the dose selection mode.
• ON: before each dispensing cycle, the dose must be
selected.
• OFF: the last dispensed dose is selected.
5.3.4 DOSE 3 SETTING
This screen is used to replace the extra dose button with a
third dose button. When enabled, button 3 will appear on the
main screen instead of button E.
• ON: Dose 3 active button
• OFF: Dose 3 not active button.
5.3.5 GRINDING ACTIVATION MODE
This screen is used to choose whether to activate the grinding
by pressing the dose key on the display, to activate it using the
grinding activation button (7) or to select both modes.
ATTENTION
In the Atom Barista machine and in the Atom Excellence
75 it will be possible to operate grinding only from the
display.
5.3.6 GRINDER MAINTENANCE
On this screen it is possible to set and reset the grinder change counter as well as
enable or disable the grinder change alarm. By pressing the SET button it is possible to
activate or deactivate the grinder change alarm using the ON/OFF keys.
When the alarm is activated, in the case of grinders to be replaced, the icon (E) will
light up on the main screen. The RESET button, if long pressed, resets the grinder
SELECT DOSE
EVERYTIME?
SET DOSE 3?
ACTIVATION
MODE
DISPLAY
MICROSWITCH
35