GBS ABSOLUTE STAGE Manual De Instrucciones página 16

CUTTING LENGTH ADJUSTMENT:
The ABSOLUTE STAGE hair clipper offers the possibility of making finishing touches from 0.8 mm to 3.8 mm
(if used without any guide comb attached and using the adjustment lever) and performing classic hair cuts
with the following lengths: 1.5, 3, 4.5, 6, 10, 13, 19 and 25 mm.
CLEANING AND MAINTENANCE:
A clean and properly lubricated hair clipper considerably improves its capacity and cutting precision.
DO NOT CLEAN ANY PART OF THE APPLIANCE UNDER RUNNING WATER.
Fig.1
ADJUSTABLE LEVER:
The lever for adjusting the cutting length is located on the left side of the
body of the appliance (Fig. 3); this lever lets you adjust the cutting length to
0.8 mm if held upwards, i.e. towards the upper body of the appliance, or 3.8
mm if held downwards, i.e. towards the rear body of the appliance.
Fig.2
16