Daewoo DALRH18-1 Manual De Usuario página 10

Functions
Switching on and off
1. Press the on/off switch to switch on the power tool.
2. Release the switch to switch off the power tool.
Adjust rotational speed
The rotational speed of this power tool can be adjusted with the on/off switch: The more you press
the on/off switch the faster is the rotation speed. Light pressure on the on/off switch leads to slow
rotation speed, increased pressure to higher speed.
Setting left/right running
Push the switch from left to right for drilling or driving in screws
Push the switch from right to left for disentangling jammed drill or loosening screws.
right position (as seen
from operator position),
for loosening
Note: The indicator lights on the top of the housing indicate which rotation direction has been set.
Left rotation for drilling and hammer
drilling
middle position, the
on/off switch is locked
Right rotation for loosening jammed
drill bits
9
left position (as seen
from operator position),
for drilling