Plug the 'Output cable' into the port labeled Dashcam on the Ultra Battery.
2.
3.
Plug your dashcam's power plug into the cigarette lighter socket or attach it to the hardwiring power cable on the Ultra
Battery's 'Output cable. '
Note
To ensure good electrical contact you can use electrical tape to tape the plug and socket together.
4.
Set the power switch to the ON position.
5.
Use a pry tool to lift the edges of the windshield trim/molding and tuck in the power cord. Use the supplied Velcro strips
to fix the Ultra Battery in place
Caution
Do not expose the product to direct sunlight and/or heat.
or
Hardwiring power cable
(Output cable for dashcam)
Cigarette lighter socket
(Output cable for dashcam)
Power Magic Ultra Battery B-130X
11