STAMONY ST-SP-3000 Manual De Instrucciones página 11

1 – PV panel
2 – Power adapter input
3 – Power output to camera trap
4 – Mount
5 – LED indicator (red – charging in progress / green – charging complete)
3.2.
Place the PV panel in a sunlit place and connect it to the camera trap. The PV panel
can also be charged with a power adapter. The battery state of charge is indicated
by the LED during the charging process.
3.3.
a) Use non-corrosive agents only for cleaning the surfaces.
b) Use a soft cloth for cleaning.
c) Do not clean with any sharp and/or metal implements (e.g. a wire brush or
a metal scraper) as these may damage the surface of the appliance.
d) Do not clean the appliance with acidic substances, medical products,
thinners, fuel, oil or other chemicals as they may damage it.
Operating the appliance
Cleaning and maintenance