SBI Connectors Y39E1E Manual Del Usuario página 11

The head of the Y39E1E can be rotated 180º relative to the fixed handle. The head must be rotated
before advancing the ram. The ram can be advanced without pumping the handle, simply rotate the
fixed handle clock-wise.
The body and handles are insulated with synthetic rubber to protect operator and tool against
accidental phase brush contact.
The remote control head Y39E1BHE has the same technical features as the Y39E1E.
2.1 Characteristics of the Y39E1E crimping tool

Easy to position tool for work with 180º head rotation.

Jaw opening: 24 mm

Versatile and economical-tool that works with all commonly used copper, aluminium and ACSR
conductors and complies with the EDF standard.

Requires the UADP1 adapter for use with "U" dies.

Body and handles covered with synthetic rubber for tool impact protection.

Easy die change accomplished with push button die locks.

Rapid ram advance reduces installation time by eliminating need to pump handles to advance
ram to connector.

Saves installation time with trigger controlled return release which returns ram to its preset
starting point.

Long continuous usage is aided with comfort grip handles.
2.1.1 Characteristics of the Y39E1BHE remote control head

Easy to work in small tight spaces with only 8 cm (3-1/8") wide compression head.

Easy to locate and hold dies in position with the positive push button die locks plus die changing
is accomplished easily without ball checks or set screws.

Easy to remove or lock into position die holder with recessed spring latch plus leather strap to
prevent loss.

Versatile tool.
2.2 Y39E1E Description
1
1.- Head. 180º head rotation.
2.- Ram.
3.- Button die. Positive push die locks.
4.- Tool body covered with synthetic rubber.
5.- High pressure valve.
6.- Central tool body; covered with synthetic rubber.
7.- Handle; pumping handle for low advance of the ram applying force.
8.- Rapid handle advance; fixed handle for rapid ram advance (by rotation) without applying force.
9.- Trigger: controlled ram release.
10.- Handle of the fixed arm
11.- Handle of the pump arm.
3
4 5
2
7
6 8
11
10
9 11