Kingfisher FS60DISHUK Manual Del Usuario página 45

EN Installation FR Installation PL Instalacja RO Montare
ES Instalación PT Instalação
01
05. x1
EN
Connect one end of the inlet supply hose to a threaded 3/4" BSP isolating tap connector and ensure
that it is fully tightened. Connect the other end to the inlet connector at the base of the back of the
appliance.
IMPORTANT: This appliance requires adequate backflow protection to ensure waste water from the
appliance cannot enter the potable water supply of your property. During installation, you must ensure
that there is adequate backflow protection to ensure local water regulations are met in the country
where the appliance is used. This includes the use of additional components such as double-check
valves and hose sets that must comply with EN 1717 or EN 61770.
5059340445731_MNL_IN_V04.indb 45 5059340445731_MNL_IN_V04.indb 45
05
45
23-05-2022 17:56:03 23-05-2022 17:56:03