Qilive Q.3407 Manual De Instrucciones página 4

1. SAFETY INSTRUCTIONS
EN
1. Type of chair: type c
2. Soft castors for hard floors. Hard castors for soft floors.
3. Warning: only trained personnel may replace or repair seat height adjustment
components with special tools!
2. PRODUCT DESCRIPTION
1. Castors x 5
2. Star base
3. Gas spring
4. Gas spring cover
5. Height adjustment lever
6. Seat
7. Armrest x 2
8. Backrest
3. BEFORE FIRST USE
■ Unpack all parts and check for damage that may have occurred during transport.
■ If any parts are damaged or missing, do not use the product and return it to the
retail outlet immediately.
■ Clean the product and its parts before the first use (see CLEANING AND CARE).
4. ASSEMBLY
Follow the assembly steps to securely assemble your gaming chair. Please check this
assembly every six months and tighten the screws with the Allen key provided.
4.1. ASSEMBLING THE SEAT PLATE
1. Turn the seat upside down.
2. Line up the screw holes on the chair with the seat plate. Make sure the arrow on
the seat plate points to the front of the seat.
3. Put the four washers onto the four seat plate screws (the shorter screws – M6 x
20mm) and insert into the screw holes. Use the Allen key to partially tighten the
screws in place. Once all the screws are in place, firmly tighten them.
Note: The washer is a disc which is inserted between the screw and the part to be
tightened. It is designed to prevent the screws from loosening.
Caution: Do not operate the seat height adjustment lever before the chair is fully
assembled, as you could injure yourself!
9. Armrest screws x 8 (M6 x 25mm)
10. Armrest screw caps x 8
11. Resistance adjustment knob
12. Seat plate
13. Seat plate washers
14. Seat plate screws x 4 (M6 x 20mm)
15. Allen key
4