Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or operate this
product. Failure to follow may result in serious injury. Save all warnings and instructions for future
reference.
WARNING
• Do not stand on, step on, or alter this unit for anything outside the designed function of
storage, or you may fall which may cause personal injury or product damage.
• Use care when handling and assembling metal plates.
• When locking the cabinet, close the drawers completely in order for the lock bars to work
properly.
• The metal may have sharp edges or corners. The use of protective gloves is recommended.
• Close and lock the drawers before moving this product. Lock wheels when the product is not
being moved.
• Always remember to use proper lifting techniques when moving the boxed or assembled unit.
CAUTION
• Do not exceed maximum load capacities listed in Product Specifications on Page 2.
• When storing articles, equally distribute loads. Always balance the loads to avoid tipping.
• Place more than half the total load weight on the bottom cabinet when possible.
• Do not open all the drawers at once, be careful when opening more than one drawer. The
product may become unstable and tip, which may cause personal injury or product damage.
• Keep the product on level surfaces. The product may become unstable and it may tip over if
stored or moved on an uneven surface, which may also cause personal injury or product damage.
• Do not store flammable liquids in the unit unless they are secured in an approved container.
• Do not store gasoline in the unit under any circumstances.
• Do not leave children unattended near this product. Cabinet may tip over if improperly opened.
• Secure all items and lock all drawers before rolling this product.
• Always use common sense and be cautious when using this product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts. It is recommended that this
product to be assembled on a clean, soft surface, such as a piece of cardboard.
Estimated Assembly Time: 20 minutes (does not include unpacking time)
Tools Required for Assembly (included): 14 mm Wrench
Tools Required for Assembly (not included): Adjustable wrench
5
Publicidad
