OPERATING INSTRUCTIONS
1. Using the caster brakes
To lock the swivel casters, step
down the levers marked with
ON. To unlock casters, push
down the levers marked with
OFF.
Note: Be sure to lock both casters to
prevent cabinet from rolling or swiveling.
2. Removing the drawers
Fully empty and extend the drawer.
Push up the release lever on the left
drawer slide while pulling down on the
other release lever. Pull the drawer
outward until it is released from the
slides.
3. Re-inserting the drawers
Pull the slides and slide carrier out
until fully extended. Hold the slide on
the drawer while aligning it with the
slide on the drawer. Slightly insert
one side and repeat for the other
side. Slowly push the drawer until it is
fully closed to engage the slide.Open
and close the drawer to verify proper
operation.
Note: Do not slide in the drawer violently
until both drawer slides are aligned properly
or it will cause damage on drawer slide.
1
2
3
7
A