Streetz CM763 Manual página 6

ENG
1. Microphone
2. Power on and off/Voice assistant
3. Decrease volume/previous song
4. Play/pause/answer call/hang up/TWS
5. Increase volume/next song
6. Mode button: Switch sound input: 3.5 mm/Bluetooth
7. Bluetooth LED indicator
8. Charging LED indicator
9. Charge port, USB Micro-B
10. 3.5 mm, input port
Safety instructions
1. Only use charging devices marked with 5 V to avoid damage to
the speaker.
2. Do not open up the speaker. It may damage the product.
3. Do not try to repair the product yourself.
4. Never place the speaker close to high temperature sources.
The speaker's battery
A built-in rechargeable battery powers the speaker.
Charging the battery
Connect the supplied charging cable to the charge input and to a
USB port on your computer or a USB charger.
The charging LED is lit during charging. The LED turns off when
fully charged.
Bluetooth
The Bluetooth range is up to 10 meters.
Obstacles between this product and the Bluetooth device can reduce
the range.
Keep the device away from any other electronic devices that may
cause interference.
Power button
Press and hold the power button for about 3 seconds to power the
speaker on or off.
The Bluetooth LED flashes to confirm. You can now connect to a
Bluetooth device or use the 3.5 mm input.
The speaker will turn itself off automatically after 10 minutes of
inactivity.
Quick press to activate voice assistant, works with Siri, Google
assistant and Huawei voice assistant.
Connect the speaker
Power the speaker on. On your device search for Bluetooth devices.
Select the speaker from the list.
The speaker will give an indication sound when the connection is
successful. The Bluetooth LED changes to static light.
Only one Bluetooth device can be connected at the same time.
If you want to connect another device to the speaker, then first
disconnect the current one.
Disconnect the speaker
On your device, disconnect the Bluetooth connection with the
speaker. Or press and hold the mode button for about 3 seconds.
6
Reconnect the speaker
Some Bluetooth devices support automatic reconnection, with those
devices the speaker will automatically reconnect.
The speaker will not automatically reconnect on devices that does
not support automatic reconnection.
Press and hold the mode button to connect to the last disconnected
device.
The play button
Play / pause / answer incoming call / end call = short press on the
play button.
Re-dial last call = Double press on the play button.
Change volume and song
When listening to music
Increase volume: Short press on the "+" button.
Decrease volume: Short press on the "- " button.
Previous song: Long press on the "-" button.
Next song: Long press on the "+" button.
During a call
Increase volume: Short press on the "+" button.
Decrease volume: Short press on the "- " button.
Audio cable
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and your device.
The speaker is now connected to your device.
Switch between 3.5 mm and Bluetooth with the mode button.
Hands-free
A ringtone will be played when there is an incoming call on the
connected device.
A short press on the play button to answer.
When hands-free is activated, you talk via the speaker's microphone.
True wireless stereo
This speaker supports TWS (True Wireless Sound) functionality. This
means that two speakers can pair with each other and function as a
2.0 wireless speaker system.
In order to use the function, you must have 2 units of the same type.
These can be paired together:
CM763/CM764/CM769.
Connect (TWS)
1: Turn on both speakers. Make sure that both speakers are not
connected to any device through Bluetooth.
2: Press and hold the Play/Pause button on one of the speakers for
about 2 seconds or until you hear a tone.
3: Release the Play/Pause button. It can take a few more seconds
before the speakers connect to each other. Flashing LED = Left and
primary speaker. Solid light on LED = Right speaker.
4: Use the Bluetooth menu on your device and pair the speakers
with your phone by selecting the speaker (it will only display one
speaker, both speakers now function as one).