Usb Function; Sd/Mmc Card Function - Bosch PB360D Instrucciones De Funcionamiento Y Seguridad

USB Function

Your Jobsite Stereo has a powered USB port located inside
the Digital Media Bay that can be used to play digital music
files from a USB mass storage device as well as charge most
USB-enabled devices.
USB - PLAYING DIGITAL MUSIC
The USB port is designed to work with USB mass storage
devices only* and is compatible with mp3 and wma file types.
Follow the steps below to play your digital music files from your
USB device:
1. Press Source button repeatedly until USB is illuminated on
the LCD display.
2. Open Digital Media Bay Door
3. Insert USB mass storage device into USB port. Numeric
display on right side of LCD display will flash while USB
device is being read. When ready, numeric display will
show the track to be played and the number of tracks
stored on your USB device. Close Digital Media Bay Door.
4. To PLAY a track, press
PAUSE.
5. To skip to the previous track press the
once. To skip ahead to the next track, press the Seek+/
button once.
6. To randomly play your digital music tracks press the
button once. The
display.
7. To play your digital music tracks in a continuous loop press
the button twice. The
LCD display.
8. To repeat a digital music track press the
times. The icon will illuminate in the LCD display.
To remove your USB device simply pull the device slowly
outward until it is free from the USB port.
Note: For errors with USB when playing music please
reference the Troubleshooting Guide.
USB - CHARGING
The USB port is designed to charge most USB-enabled
devices such as cell phones and external digital media players.
Follow the steps below to charge your USB-enabled device:
1. Make sure your Jobsite Stereo is plugged into a 120V
power source.
2. Insert the USB end of your device cable into the USB port
inside the Digital Media Bay. Insert the other end of your
device cable into your device. Your device should begin to
charge.
Note: With your Jobsite Stereo plugged into a 120V power
source your USB-enabled device will power at any time,
regardless of which SOURCE your Jobsite Stereo is being
used. * Not guaranteed to work with all USB-enabled devices.
button once. Press again to
/-Seek button
icon will illuminate in the LCD
icon will illuminate in the
button three

SD/MMC Card Function

Your Jobsite Stereo has a SD/MMC expandable memory card
port located inside the Digital Media Bay that can be used to
play digital music files.
SD/MMC - PLAYING DIGITAL MUSIC
The SD/MMC port is designed to work with most SD/MMC
cards and is compatible with mp3 and WMA file types. Follow
the steps below to play your digital music files from your
SD/MMC memory card device:
1. Press Source button repeatedly until SD is illuminated on
the LCD display.
2. Open Digital Media Bay Door
3. Insert SD/MMC card device into SD/MMC port until the
card is secure. Note: For proper insertion, label side of the
SD/MMC card should be facing right. Numeric display on
right side of LCD display will flash while SD/MMC card
device is being read. When ready, numeric display will
show the track to be played and the number of tracks
stored on your SD/MMC card device. (See figure below
Close Digital Media Bay Door.
4. To PLAY a track, press
PAUSE.
5. To skip to the previous track press the
once. To skip ahead to the next track, press the Seek+/
button once.
6. To randomly play your digital music tracks press the
button once. The
display.
7. To play your digital music tracks in a continuous loop within
the same folder press the
will illuminate in the LCD display.
8. To repeat a digital music track press the
times. The icon will illuminate in the LCD display.
To remove your SD/MMC memory card simply depress the
card in its slot and the card will eject.
Note: For errors with SD/MMC memory cards when playing
music please reference the Troubleshooting Guide.
9
12V
AUX 1
IN
LINE
OUT
button once. Press again to
/-Seek button
icon will illuminate in the LCD
button twice. The
button three
icon