KIKKA BOO IZZY Instrucciones De Montaje página 4

WARNINGS
• Do not leave the child unattended.
• Ensure that it is correctly fitted and adjusted before each use.
• Do not use the high chair unless all components are correctly fitted and adjusted.
• Be aware of the risk of the open fire and other sources of strong heat, such as electric bar fires, gas fires etc. In the vicinity of the high
chair. Never place the high chair near these items.
• Your child' s safety is your responsibility.
• Only suitable for children who can sit unaided and weigh less than 15kg.
• Always ensure that the high chair has been correctly assembled and that all locking devices have engaged before placing your child in
the high chair.
• Ensure that all parts of your child' s body are clear of the high chair when assembing, folding or making adjustments.
• Do not allow other children to play with this high chair, it is not a toy. Store safely out of reach when not in use.
• Never carry the high chair when the child is in it.
• Do not allow children to stand on the footrest and seat or to climb in and out of the high chair.
• Only use the high chair on a level floor surface.
• Never add accessories or fittings that have not been approved by the manufacturer.
• This product complies with BSEN/EN 14988:2017
• The correct use and maintenance of this high chair is essential. Always ensure the high chair is stored in a dry place to prevent mould or
mildew developing.
• Avoid leaving your high chair in direct sunlight for prolonged periods of time as this may cause premature fading of colours.
1. PARTS LIST
1. Washable cover coat of high chair; 2. High chair body; 3. Tray of high chair; 4. Removable cover tray; 5. Tray parts; 6. Tray toys;
NOTE:Carefully remove all parts from the packing and lay them out in front of you.
2. SSEMBLY
2.1. Open high chair.
2.2. Press this botton and rotate handrail.
2.3. Press the spring clip and insert the tube until the spring clip extends out.
2.4. Buckle this plastic buckle indicated by the arrow.
2.5. Buckle this button on back of high chair.
2.6. Press this button and adjust footrest.
2.7. Connect tray(A) with high chair handrail.
3. THE METHOD TO FOLD
4. MAINTENANCE AND CARE
• Metal parts may be cleaned with a damp cloth and wiped dry with a soft cloth.
• Clean the harness with a mild soap and water solution.
• Rinse and wipe dry.
• Clean plastic parts with a mild soap and water solution.
• Rinse and wipe dry.
• Do not use abrasive cleaners or bleach.
ENGLISH