Lumme LU-1829 Manual De Instrucciones página 4

USING THE BLENDER
• Install the blender accessory and connect the appliance to a power supply.
• Place the accessory in a cup with the product, hold the handle.
• Select the proper speed.
• Move the blender in the cup in a circular motion for proper grinding.
• Avoid any liquids splashing on the engine compartment/handle.
• In case the cutting blades get blocked the appliance should be disconnected from the power supply before unblocking the blades.
• After use, remove the appliance from the power supply and disconnect the blender.
USING THE WHISKER
• Connect the metal part of the whisker to the housing and connect the housing to the engine compartment/handle.
• Place product inside a cup.
• Connect the appliance to a power supply and select the proper speed.
• After use, remove the appliance from the power supply and disconnect the whisker.
USING THE CHOPPER
• Position the chopper blades inside of the chopper cup, add products
• Place the cover and engine compartment and close it tight.
• Connect the device to a power supply and select a proper speed
• After use, remove the appliance from the power supply and disconnect the chopper.
CLEANING AND MAINTENANCE
• Before cleaning, always unplug the appliance from the power supply.
• Use a wet cloth to clean the housing, do not submerge the appliance in water or other liquids.
• Clean accessories in soapy water and dry.
• Do not use chemical and/or abrasive cleaners for cleaning.
• We recommend you to clean the device right after operating, to avoid colouring of the plastic parts.
SPECIFICATION
Power supply Power
220-240 V, 50 Hz 600 W
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of
device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
Net weight / Gross weight Package size (L х W х H)
0,71 kg / 0,83 kg 185 mm x 77 mm x 233 mm
Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
Made in China
4
LU-1829