Coast Air EU-OSK105 Manual Del Control Remoto página 8

6
NETWORK CONFIGURATION
Cautions
It is necessary to forget any other networks and make sure
the Android or i OS device just connects to the Wireless
network you want to configure.
Make sure the Android or i OS device Wireless function
works well and can be connected back to your original
Wireless network automatically.
Reminder:
User must finish all the steps in 8 minutes after powering on
the air conditioner, otherwise you need to power on it again.
Using Android or iOS device to do network
configuration
Make sure your mobile device has already been
connected to the Wi-Fi network which you want to use.
Also, you need to forget other irrelevant Wi-Fi networks in
case it influences your configuration process.
Disconnect the power supply of AC.
Connect the power supply of AC, and continuously press
the "LED DISPLAY" or "DO NOT DISTURB" button seven
times in 10 seconds.
When the AC displays "AP", it means that the AC Wi-Fi
has already entered into "AP" mode.
Note:
There are two ways to finish the network configuration:
Network configuration by Bluetooth scan
Network configuration by selecting appliance type
Wireless Control Manual - DIY Ductless Mini-Splits
6