Descargar Imprimir esta página

EUROM LO10.100H Manual De Instrucciones página 8

Publicidad

Read and retain these instructions for future reference!
Technical specifications
Power supply
Test condition
Dehumidification capacity
Power / Ampere consumption
Lair volume (max.)
Refrigerant
Working range
Water tank
Size (WxDxH)
Weight
Cautions before use
Always keep the unit in vertical position.
Leave the unit to stand for one hour before connecting to the mains supply after
transport or when it has been tilted (e.g. during cleaning).
Keep all foreign objects away from the air intake or output openings.
The mains supply must conform to the specification shown on the rating plate at the
back of the unit.
If the supply cord is damaged, it must be replaced by an approved service
representative or a similar qualified person in order to avoid a hazard.
Never use the plug to start and stop the unit. Always use switch on the control panel.
Before moving the unit, first switch off, then unplug and empty the water tank.
Don't use bug sprays or other flammable cleaners on the unit.
Never pour or spray water over the unit.
This appliance is not intended for use by persons (including children) with reduces
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with appliance.
IMPORTANT! Do not use this unit at ambient temperatures below 5oC, to prevent
the possibility of a heavily ice up evaporating coil.
English
EUROM LO10.100H
220-240 Volt / 50 Hz
DB 30°C, RH 80%
10 liter per dag
220 Watt - 1,23 Amp
100 m³/uur
R134a
5 – 32°C
1,5 liter
23 x 29 x 42,5 cm
10 kg.
8

Publicidad

loading