Elpress EWG-S 1 - 6 Manual De Uso página 11

8
8.1 Cleaning preparations
8.2 Daily maintenance
Cleaning and maintenance
The control panel of the installation may never be cleaned with a jet of
liquid (e.g. garden hose or high-pressure cleaner). This could lead to
irreversible damage being caused to the installation.
The following points are important for cleaning the installation:
• Disconnect the installation from the power supply.
SENSOR OPERATED / EWG-TAP
• Shut off the water supply when components of the wash basin are
being checked or cleaned.
• The wash basin must be cleaned several times during use as well as
at the end of each working day or if dirty.
• Clean and dry the lens of the sensor. For this purpose, use a soft
cloth to avoid damaging the sensor
SENSOR OPERATED
Daily maintenance
.
q
EN
11