Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
OPERATION INSTRUCTIONS
1.
Place the product on flat and dry platform then plug into power outlet.
2. Take out the container (#3) and fill it with coffee beans. Maximum capacity should not
exceed 60g (2.1 oz.) or 2/3 of the container.
3. Put the container back onto the base/motor unit (#4).
4. Put the cover (#2) onto container and make sure the switch pin (#6) in cover is
aligned with a corresponding hole on the lip of the base/motor unit.
5. Hold the on/off switch button (#1) down for grinding for a maximum of 30 seconds.
Then release on/off switch button and let unit sit for at least one minute to let the
motor cool down before using again.
6. Unplug the power cord when finished.
7. Before taking out the container after grinding, tap the cover softly to let any ground
coffee drop down into the container.
8. Pour the ground coffee into your storage container.
CLEANING AND CARE
1.
Make sure the product is unplugged before cleaning.
2. Use water to wash the container and cover, then wipe with soft cloth. Detergent is not
allowed.
CAUTION: Be careful when cleaning container as blades are located at the bottom.
3. Use wet and soft cloth to clean the motor unit.
CAUTION: DO NOT immerse motor unit in water or any other liquid.
4. Store the product after it is dry.
Page 6
Max 60g or 2/3 of the container
Publicidad
