Publicidad
STEP 7
1.
Insert 6 wood dowels (C) into wood dowel holes on top board (1).
2.
Attach top board (1) to upper left side panel (2), upper right side panel (3), upper left
support board (5) and upper right support board (6) by inserting wood dowels (C) into wood
dowel holes and inserting cam bolts (A) into cam lock holes on upper left side panel (2),
upper right side panel (3), upper left support board (5) and upper right support board (6).
3.
Insert 4 cam locks (B) into cam lock holes on upper left side panel (2) and upper right side
panel (3), then rotate clockwise to secure cam bolts in place.
STEP 8
1.
Insert 1 wood dowel (C) into wood dowel hole on bottom board (15).
2.
Attach bottom board (15) to lower left side panel (10) by inserting wood dowel (C) into
wood dowel hole on lower left side panel (10).
3.
Insert 1 screw (K) through hole on lower left side panel (10), then tighten to bottom
board (15).
Publicidad
