Marathon Berlin Manual De Instrucciones página 15

Getting started
Powering up the weather station
Connect the power cord to the wall outlet or remove
the battery compartment door and insert 3pcs AAA size
battery.
NOTE:
Before connecting the unit to power, make sure
•
your local voltage is the same as marked on the
adaptor.
If solely powered by battery, the backlight will be
•
off. To turn the back light on for 5 seconds, press
the button.
SNOOZE/DIMMER
When the power adaptor is connected, the weather
•
station will automatically pull power from the
external power supply.
Powering up the outdoor sensor
Open battery cover, and insert 2 x AA batteries
observing polarity [ + and – marks]
Proper installation
Place the main unit on a flat surface.
•
The remote sensor should be securely mounted
•
vertically to a surface.
Transmissions between receiver and transmitter can
•
be reached up to 70m apart in open areas. Open
areas refers to areas with no interfering obstacles
such as buildings, trees, vehicles, high voltage
lines, etc.
EN