Blue Sky Outdoor Living PCD38R Manual Del Propietário página 5

SELECT A FLAT CLEAN LOCATION TO ASSEMBLE YOUR PRODUCT.
Deluxe Fire Pit Cover Assembly
STEP 1
Open up the fabric cover so the Blue Sky Logo
is face down. You will need access to the center
D
of the cover for support assembly.
Place one end of a long rod (D) inside one of
B
the longer posts of the center hug (B) - the end
of the rod with the protective plastic cap would A
be sticking out of the hub.
STEP 2
Insert the capped end of the long rod into the
D
corner pockets that have been sewn into each
of the corners of the inside top of the cover.
B
(Make sure the flat side of the hub is laying
directly on the cover fabric. The star should be
A
facing you during installation.) Repeat with 3
remaining long rods.
STEP 3
C
Repeat step 2 with remaining short rods (C).
Inserting into the center hub and fabric side
B
pocket.
A
5 | www.bluesk youtdoorliving.com