Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
•
If parts of the machine are damaged, do not use
the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
WARNING
For your personal safety, do not insert battery before
the tool is assembled completely.
8.2
INSTALL THE BATTERY PACK
WARNING
•
If the battery pack or charger is damaged, replace
the battery pack or the charger.
•
Stop the machine and wait until the motor stops
before you install or remove the battery pack.
•
Read and understand the instructions in the
battery and charger manual.
1. Align the ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.3
REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
English
9
OPERATION
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
9.1
POWERING ON THE LIGHT
1. Install the battery pack.
2. Press the ON/OFF switch (1) to turn the light on.
3. To reduce the brightness, press the ON/OFF button
again.
9.2
SET THE LIGHT MODE
This machine has three different light settings.
1. High light setting: Press the ON/OFF button. The
machine will be turned on at maximum brightness.
2. Medium light setting: Press the ON/OFF button
twice. The machine will be turned on at medium
brightness.
3. Low light setting: Press the ON/OFF button three
times. The machine will be at lower brightness.
9.3
POWERING OFF THE LIGHT
1. Cycle the ON/OFF switch to turn the light off.
9.4
ATTACH THE LIGHT TO THE AUTO
HOOD
7
WARNING
EN
Publicidad
