Dräger FPS-COM 7000 Instrucciones De Uso página 17

Fault Cause
Insert cannot be fitted/ Screw blocks the
pulled out insert
Insert path blocked
Screw not completely
loosened
Communication unit Fixing lugs on
cannot be fitted/ facepiece visor frame
dismantled not available or
defective
Mount defective
Fastening eyes on
communication unit
defective
Communication unit
not hooked in
correctly
Earphone cannot be Earphone deformed
bent to desired or gooseneck
position defective
Dräger FPS-COM 7000
Remedy Fault
Lift screw. No connection via
cable to radio
possible
Check sealing and
grease or replace if
necessary.
Clear insert path and
carefully fit insert.
Completely loosen
the screw, making
sure that the spring
below the screw can
move freely, lift it if
necessary.
Push-button jams
Replace visor frame.
Slide switch jams
Replace mount.
Replace fastening
eyes.
5
Dismantle
5.1
communication unit
and fit again.
Replace earphone.
Work to be carried out
Check the functioning of the communication unit
Cause
Cable defevtive
Cable not fitted
correctly
Incorrect cable
connected
Push-button soiled
Slide switch soiled
Slide switch damaged Replace slide switch.
Maintenance
Maintenance intervals
Maintenance
Remedy
Replace cable.
Check connection
between cable and
radio. Fit cable again
if necessary.
Check connection
between cable and
communication unit.
Fit cable again if
necessary.
Use suitable cable.
Clean push-button.
Dismantle and clean
slide switch.
X
17