Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF PARTS
1.
On/Off Button
2. LED Ring
3. Hot Surface Indicator
4. Lid
5. Handle
6. Power Cord
SET UP
1.
Open the Lid and remove any packaging contents.
2. Place the Towel Warmer on a dry, level, hard surface.
3. Insert Plug into a standard 120V outlet.
USING THE TOWEL WARMER
The Towel Warmer can comfortably warm up two large cotton bath towels or a
personal throw blanket.
1.
Insert the power cord into an electrical outlet.
2. Open the LID and place ONLY DRY towel(s) or blanket inside.
NOTE: Placing damp or wet towels inside the towel warmer can damage the unit
and pose serious safety risks.
3. Close the LID.
4. Press the ON/OFF BUTTON. The LED ring will turn red, indicating that the unit is
heating.
5. When the temperature of the INTERIOR SURFACE exceeds 122°F / 50°C, the
HOT SURFACE INDICATOR will light up. When lit, the INTERIOR SURFACE of the
EN
Towel Warmer is unsafe to touch.
4
Publicidad
