Quick guide Varseo XS
•
Check the network connection by viewing the IP address.
•
Call up the following menu items and confirm every selection with the OK button
purpose:
BEGO VARSEO XS
INFO
FUNCTIONS
SYSTEM VERSION
SETTINGS
RESIN STATUS
INFO
NETWORK STATUS
LAN MAC
XX:XX:XX:XX:
XX
[OK] NEXT
•
Press the HOME-button
to call up the main menu.
12
•
If an error message appears, check the connectors of the LAN cable on the back of the
device
and on the router.
10
Further information can be found
in the operating instructions, chapter: Initial commissioning
3b. Network connection via WLAN
The device is set to LAN connection by default.
•
To use the device via WIFI, call up the following menu items and confirm every selection
with the OK button
:
15
SETTINGS
BEGO VARSEO XS
NETWORK
FUNCTIONS
WIFI
SETTINGS
BUZZER
INFO
•
Connect the printer with a WIFI network.
•
Call up the following menu items and confirm every selection with the OK button
purpose:
SETTINGS
BEGO VARSEO XS
NETWORK
FUNCTIONS
WIFI
SETTINGS
BUZZER
INFO
The device starts searching for available WIFI networks. Wait until the process is comple-
ted. The available WIFI networks are displayed on the device, e.g. (06/20).
8
LAN IP:
PRINTER NAME
XXX.XXX.XXX.XXX
40100XXXX
[OK] NEXT
[OK] NEXT
NETWORK
[LAN]
[LAN]
WIFI
[OFF]
LAN
[ON]
WIFI
[OFF]
SEARCHING FOR
[LAN]
C ONNECT
WIFI NETWORK
[OFF]
DISCONNECT
[ON]
BACK
PLEASE WAIT...
•
Select the WIFI connection to connect the device with from the list.
for that
•
Select the following menu item to enter the WIFI password:
15
WE FOUND (06/20)
ACCESS POINT 5
ACCESS POINT 6
SEARCH AGAIN
The key pad and the HOME button
•
Enter the password with the keypad. Four input modes are available, which can be togg-
led by pressing the HOME button
• English upper case letters (A–Z),
• English lower case letters (a–z),
• Arabic numerals (0–9) and
• special characters ( ! „ # $ % & ' ( ) * + , - . / : ; < = > ? @ [ ¥ ] ^ _ ' { | } →).
The currently selected entry mode is indicated in square brackets on the top right of the
screen. In password entry mode, the keys have following functions:
• HOME-Button
• Up and down buttons
• Left and right buttons
•
The password is shown in clear text when it is entered.
•
Press the OK button
•
After the printer has established a connection with the selected network, complete the
process by pressing the OK button
PASSWORD
[ABC]
ABC
[HOME] KEY MODE
[OK] TO FINISH
[ACCESS POINT 6]
IS CONNECTED
[OK] TO FINISH
for that
15
•
Press the HOME button
ACCESS POINT 6
ENTER PASSWORD
KEYPAD HINT
must be used together to enter the password.
12
:
12
: Change entry mode
12
: Select numerals, letters or special characters
14
: Switch to previous or next digit
13
to complete the password entry.
15
.
15
PASSWORD
[@#$]
PASSWORD
[abc]
@#$
abc
[HOME] KEY MODE
[HOME] KEY MODE
[OK] TO FINISH
[OK] TO FINISH
to call up the main menu.
12
CONNECTING TO
[ACCESS POINT 6]
PLEASE WAIT...