Bego Varseo XS Breves Instrucciones De Uso página 9

• Check the network connection by viewing the IP address.
• Call up the following menu items and confirm every selection with the OK button
purpose:
BEGO VARSEO XS INFORMATION
FUNCTIONS SYSTEM VERSION
SETTINGS RESIN STATUS
„ INFO „ NETWORK STATUS
IP:
WIFI AP SSID
XXXXXXXXXX XXX.XXX.XXX.XXX
[OK] NEXT
[OK] NEXT
• Press the HOME-button to call up the main menu.
12
Further information can be found
in the operating instructions, chapter: Initial commissioning
4. Exporting machine parameters
Every device has individual machine parameters. These parameters are stored in a bcp
file on the device and are required to activate your device on my.BEGO.com as well as
for the CAM software BEGO CAMcreator Print. These parameters can be downloaded
onto the USB flash drive included with the scope of delivery as follows:
• Plug the provided USB flash drive into the USB port
vice.
• Call up the following menu items and confirm every selection with the OK button
BEGO VARSEO XS FUNCTIONS
MOVE PLATFORM
„ FUNCTIONS
„ EXPORT BCP FILE
SETTINGS
INFO
• Remove the USB flash drive from the 3D printer.
• Connect the USB flash drive to your computer. The machine parameters are stored on
the USB flash drive as a BCP file in the "Profile" folder.
• Copy the exported BCP file to you computer, as needed, to facilitate easy access to the
parameters in the future.
for that
15
PRINTER NAME
40100XXXX
[OK] NEXT
WIFI MAC:
XX:XX:XX:XX:
XX
[OK] NEXT
located on the front of the de-
7
:
15
EXPORT BCP FILE TASK COMPLETED
NO
„ YES
[OK] TO FINISH
5. Registration on my.BEGO.com
In order to activate your BEGO Varseo XS 3D printer, the printer must first be registered on
my.BEGO.com.
• Export the machine parameters (bcp file) from the device to the provided USB flash
drive as described above.
• Open the "BEGO Varseo Activation.exe" file in the "Profile" folder on the provided USB
flash drive.
• Enter all required data and confirm your entries to activate your printer with my.BEGO.
com.
The activation will take place automatically.
After registration, an e-mail containing the user information that you have chosen will be
sent to the e-mail address you have specified.
• Download the BEGO CAMcreator Print software from your my.BEGO.com account and install
it on your computer. Instructions on how to import the machine parameters (bcp file) to the
BEGO CAMcreator Print software can be found in the software's installation instructions.
These can also be accessed on my.BEGO.com.
After the printer has been successfully activated on my.BEGO.com and the BEGO CAMcrea-
tor Print software has been installed, print jobs can be generated and objects can be printed
with the 3D printer.
Please note that the Varseo XS printer must registered on my.BEGO.com and
online to execute print jobs!
Further information can be found
in the operating instructions, chapter: Initial commissioning
Quick guide Varseo XS
9