FanJu FJW4 Manual Del Usuario página 10

► When device binding successful, press Continue. Please allow "WeatherSense" to get your
current location in order to to collect your local weather data from internet.
► After the connection is successful, the weather station device will automatically exit AP mode. If
not please press "Wi-Fi" button 3 seconds to exit
time, air pressure, weather forecast and temperature prediction of the network, and display it in the
display screen.
Note: If the power adapter is disconnected, the WIFI connection of the base station will be
automatically disconnected.
Outdoor Sensor Transmission
7.
► When the Base Station successfully receives signals from the wireless sensor, the temperature
and humidity of the OUTDOOR are displayed on the OUTDOOR column of the BaseStation.
► The base station can connect up to 3 channel wireless sensor registration, the use of multiple
wireless sensor, the wireless sensor channel can not choose the same channel at the same time
(a total of 1, 2, 3 channel can choose)
► Press the " " button can switch the display of different channels of outdoor temperature and
humidity, when displaying the symbol "
switch a channel
If the Base Station failed to receive transmission from outdoor sensor ("- -"display on the LCD),
►
press and hold "
temperature will show an animation of the RF antenna symbol，the Base Station will re receive the
wireless signal of the outdoor sensor.
W4 WIFI Weather Station
", will display the channel every 5 seconds automatically
" button for 3 seconds to receive transmission manually. the outdoor
it. The base station will automatically obtain the
:
10