Anker Soundsync Manual Del Propietário página 10

Receive Mode (RX)
To enter Receive mode, turn the TX/RX switch to the RX position.
Connect your Soundsync to a non-Bluetooth headphone, speaker, or
car stereo etc. Via a 3.5mm audio cable. Then pair your Soundsync with
a Bluetooth-enabled smartphone or tablet via Bluetooth. The music
from your Bluetooth-enabled device then can be transmitted to the non-
Bluetooth headphone, speaker or car stereo etc.
RX Mode
2 x 2
Press twice
Flashing red and blue
alternately
Steady blue
Steady green
AUX / SPDIF IN
1
Enter/Exit Bluetooth pairing
mode (Receiver mode)
Connected to one device (RX
mode)
Connected to two devices
EN
08