Anker Soundsync Manual Del Propietário página 8

Transmit Mode (TX)
To enter Transmit mode, turn the TX/RX switch to the TX position.
Connect Soundsync to a non-Bluetooth multimedia device (such as TV,
PC) via a 3.5mm audio cable or an optical cable. The audio source from
the device can be transmitted to a Bluetooth headphone or speaker via
Soundsync.
TX Mode
AUX / SPDIF IN
TV
Press twice
Rapidly flashing
blue
Slowly flashing blue
Steady green
2 x 2
1
Enter/Exit Bluetooth pairing mode
Connected to one device (TX
mode)
Connected to two devices
EN
06