Vacuum Maintenance And Care; Dust Cup Emptying; Filter Cleaning - Sears Kenmore CSV Go S4015 Manual De Uso Y Cuidado

CAUTION
To reduce the risk of electric shock, remove the charging adapter from the unit, and
make sure the unit is turned off before any maintenance.
EMPTYING DUST CUP AND CLEANING FILTER

Dust Cup Emptying

For best performance, empty dust cup
after every use or once dust reaches max
fill line. Never operate the vacuum cleaner
without dust cup and filter in place.
Before emptying the dust cup, ensure the
vacuum is turned off.
1. Position dust cup lid area of vacuum
over a waste receptacle. Press down the
dust cup release latch to open dust cup
lid and allow cup contents to drop into
waste receptacle.
Dust Cup
Release
Latch
2. Close dust cup lid until you hear a click.

VACUUM MAINTENANCE AND CARE

Click

Filter Cleaning

If there is hair wrapped or blocked in the
dust cup or the suction power is weak, it is
necessary to wash the HEPA filter and pre-
filter basket to clean off accumulated dust
or hair.
WARNING:
cleaner without filters in place.
1. With one hand grasped around the
handle, press the filter release button to
separate the dust cup and filters from
the hand vacuum.
Filter Release Button
- 12 -
Do not operate vacuum